Built Tough Air Compressor Pressure Switch AB9063227 Delivers Knockout 150 Psi Cut Out And 120 Psi Cut In Pressure For Serious Shop Jobs Featuring 24 Volt AC Wiring And Quarter Inch NPT Ports For Fast Plug And Play Swap On Most Air Tanks
✔️ Cuts at 150 PSI and triggers at 120 PSI with 24V AC power
This AB9063227 gas pressure switch replaces blown controllers on most shop air compressors. You will get steady tank cycling for pneumatic impact wrenches and tire inflation. The straightforward design makes this swap handy for tight engine bays and cramped garages. Simply unplug your main breaker to lock out power before you lift the old unit.
✅ 150 PSI cut out and 120 PSI cut in settings manage tank pressure✅ 24 V AC coil rating handles up to 20 amps without overheating
✅ One quarter inch NPT threaded port fits Bosch and standard tanks
✅ Direct replacement for Bosch CAP2000P-OF TYPE 1 and CAP1512-OF TYPE 0 models
✅ Compact 2.3 by 1.1 by 1.0 inch shell bolts straight to steel tank walls
💡 What wiring method prevents premature contactor welding when swapping a 24 volt gas pressure switch Match your existing control board to the switch rated current and route thick copper strands to lower resistance - Connect the red and blue leads directly across the contractor lugs to stop arcing during high draw cycles - Apply heat shrink over exposed crimps to shield your connections from shop floor oil mist and debris - Rotate the adjustment knob clockwise until the manifold gauge clicks off right at 150 PSI
✝️