Beefed Up Front Suspension Repair Kit With Upper Lower Control Arms Ball Joints Sway Bars And Tie Rod Ends 16 Piece Set Smooth Setup For Chrysler 300 Dodge Challenger Charger Rwd

Front suspension upgrade kit with control arms and tie rods.
✔️ Matches 2011-2017 Chrysler 300 and Dodge Challenger RWD cars.

This 16 piece set rebuilds worn steering and handling components before you hit the highway. You install it directly into the front chassis of rear drive sedans to restore smooth cornering and sharp response.

✅ Two upper control arms with pre assembled ball joints attached
✅ One lower control arm paired with a pre assembled ball joint
✅ Two additional lower control arms for complete axle coverage
✅ Two inner and two outer tie rod end links replace worn shafts
✅ Single sway bar end link stabilizes body roll during turns
✅ Two extra suspension ball joints reinforce critical pivot points
✅ Two tie rod boots with locking C clamps keep out road debris

💡 What causes early failure in front axle linkage assemblies?
Worn ball joints and tie rod ends create play that ruins tracking angles.
- This handy full kit rebuilds pivot points so your wheels track straight
- Heavy duty steel knuckles hold torque ratings higher than stock parts
- Matching geometry stays accurate right off the jack stands
- Locking grease fittings keep dust out of fragile thread pockets