Heavy Duty Round Flange Pillow Block Bearing Housing Built To Grind With Smooth Low Noise Operation Resists Vibration And Handles Extreme Weather A Reliable Workhorse Replacement For 1 1/16 Inch Shaft UC206 Style Units

Round Flange Pillow Block Bearing Housing Unit
✔️ Matches 1-1/16 inch shafts with sealed steel build

You get a single replacement unit that slides right onto your existing drive shafts. You will find these handy housings on conveyor belts, grain augers, and packaging machines that run nonstop in dusty barns.

✅ Inner diameter fits 26.99 mm or 1-1/16 in shafts
✅ Outside diameter spans 62.00 mm or 2.441 in across the flange
✅ Total length runs 113.00 mm or 4.449 in from bolt hole to tip
✅ Inner ring width measures 38.10 mm or 1.5 in thick
✅ Outer ring width sits at 19 mm or 0.748 in wide

Bearing Inner Diameter	26.99 mm / 1-1/16 in
Outside Diameter	62.00 mm / 2.441 in
Overall Length	113 mm / 4.449 in
Gewicht	0.630 KG / 1.39 lbs

💡 What matters most when installing a heavy duty roller pinion pillow block mounting system? These handy assemblies keep your drive trains aligned because cold rolled steel plates resist twisting under constant torque. - Threaded base bolts slide into tapped frames for fast alignment checks - Contact rubber shields stop grit from grinding into the chrome steel raceways - Standard grease ports hold fresh lube longer between scheduled maintenance stops

✝️